Access Controllers, Readers & Accessories
Serial main and sub-controllers: All door hardware is connected to sub-controllers. Sub-controllers usually do not make access decisions, and instead forward all requests to the main controllers. Main controllers usually support from 16 to 32 sub-controllers. TCP/IP Modules/interfaces are used as communication interface to the PC to transfer the logs of entry and exist. Work load on the host PC is significantly reduced, because it only needs to communicate with a few main controllers. The overall cost of the system is lower, as sub-controllers are usually simple and inexpensive devices.
Non-intelligent, Semi Intelligent and Intelligent  readers: Simply read the card number or PIN, and forward it to a control panel. In case of biometric identification, such readers output the ID number of a user. Typically, Wiegand protocol is used for transmitting data to the control panel, but other options such as RS-232, RS-485 and Clock/Data are not uncommon. This is the most popular type of access control readers. Examples of such readers are RFIF, Mifare, HID, UHF long range, etc.
FM-C20E
20 Floor Elevator Extension Control Board
Support TCP/IP protocol and Auto-discovery tool for easy access with Anti-pass back system.
Support TCP/IP protocol. Auto-discovery tool allows setting and modification of network parameters directly and easily with Anti-pass back system.
FM-C20
20 Level Elevator Controller with floor limitation
Support TCP/IP protocol and Auto-discovery tool for easy access with Anti-pass back system.
Support TCP/IP protocol. Auto-discovery tool allows setting and modification of network parameters directly and easily with Anti-pass back system.
FT-15NC
Extreme Weatherproofing: Boasts an IP68 waterproof rating and is fully potted with glue inside, making it suitable for direct outdoor installation in harsh environments.
Dual Mode Functionality: Can act as a standalone controller for one door or as a Wiegand 26/34 reader for an existing network system.
Support for Multiple Formats: hey can read various card types including MIFARE Classic, MIFARE DESFire (EV1/EV2/EV3)
F-P001E
EM proximity Wiegand card reader is a device that reads 125KHz frequency RFID Proximity credentials and transmits the data to a door controller using the Wiegand interface. This setup is the industry standard for connecting modern, secure smart cards to both legacy and new access control panels
Wiegand Interface: Once the card is read, the device converts that information into a binary string (typically 26-bit or 34-bit) and sends it over two data wires, Data0 and Data1.
F-P001M
MIFARE Wiegand card reader is a device that reads 13.56 MHz high-frequency MIFARE credentials and transmits the data to a door controller using the Wiegand interface. This setup is the industry standard for connecting modern, secure smart cards to both legacy and new access control panels
Durable Build: For environments in the UAE, these readers often feature IP68 ratings, ensuring they are dust-proof and waterproof for outdoor use.
F-P001C
EM, MIFARE, and HID combo card reader is a multi-technology device designed to read three of the most common RFID standards simultaneously. These readers are essential for facilities transitioning between old and new security technologies or managing a workforce with mixed credentials.
125 kHz (Low Frequency): Decodes HID Prox (proprietary corporate standard). 13.56 MHz (High Frequency): Decodes MIFARE Classic, MIFARE DESFire
FT-1201
RFID proximity reader and controller, easy to install, easy to use, stable performance.
High User Capacity: Stores up to 2,000 user cards or individual PIN codes, making it suitable for high-traffic environments.
Backlit Touch Keypad: The digital touch interface includes a blue backlight, ensuring the keypad remains visible and easy to use even in total darkness.
Touch keypad with backlight, with LED and electronic buzzer.
F-4
This is a dedicated fire and alarm linkage expansion panel for FELIX Centralized Access Control Board series controllers.
Direct Fire System Integration: When the fire signal is received, doors in the controlled area are unlocked automatically.
Support for the ‘illegal intrusion’ and ‘coercion to enter,’ and ‘invalid card’ and ‘fire’ alarm linkage output
FT-3W
IP68 Waterproof Rating: It is fully potted (sealed with epoxy resin), allowing it to operate underwater or in extreme rain and humidity, which is ideal for outdoor gates in the UAE.
Adjustable Door Output Time: The relay toggle time can be programmed from 0 to 99 seconds, allowing it to work with magnetic locks, electric strikes, or automated gate motors.
FT-9W
Rugged Outdoor Design: Features a metal casing with an IP65 waterproof rating and vandal-proof rating, making it highly resistant to physical impact and harsh weather conditions.
Durable Build: For environments in the UAE, these readers often feature IP65 to IP68 ratings, Dust-proof and waterproof for outdoor.
FC-101
Vandal-Resistant Metal Case: Built with a tough, impact-resistant metal housing that can withstand physical abuse, making it ideal for unsupervised public entrances.
Integrated Auxiliary Interface: Features an Auxiliary Input and Output that can be linked to external devices like sirens, strobe lights, or door monitors.
FA-R1
Weather Shielding: The protruding “brow” or hood prevents rainwater from seeping into the keypad seams or pooling on the reader lens, maintaining the unit’s IP65/IP68 integrity.
UV Protection: Constant exposure to the Dubai sun can cause plastic keypads to become brittle or OLED screens to fade. ABS plastic is naturally resistant to UV degradation.
EL-2000R
Access Control Board for Two Readers
10,000 cards & 30,000 off-line transaction events
Global Anti-Passbook | Door Interlocking Capability
EL-GP20P-10
Weather resistant RFID Reader
Wide voltage range from 5 to 12.5 VDC
Externally programmable interface
EL-T1102MF
Weatherproof Touch Access Keypad Controller
13.5MHz IC Card Proximity Mifare | Stand-Alone Device
Verify via Password and or Card | Metal Case
EL-T1102EM
Weatherproof Touch Access Keypad Controller
125KHz RFID Card Proximity ID EM | Stand-Alone Device
Verify via Password and or Card | Metal Case
EL-ST100
Weatherproof Proximity Door Access Controller
Stand-Alone Device | Verify via Password/Card | Anti Card Collision
Four types of verification mode for greater security
EL-RD100
Weatherproof ProAce Proximity Reader
Exceptional Detection, High Reliability, Consistent Read-Range and Stability
Controller LED’s and Electronic Buzzer
EL-RD200
Weatherproof ProAce Proximity Reader with Integrated Keypad
50mm Maximum Effective Reading Range
Controller LED’s and Electronic Buzzer
EL-SR10D
Weatherproof Proximity ID Card Reader
Exceptional Detection, High Reliability, Consistent Read-Range and Stability
Controller LED’s and Electronic Buzzer
EL-SR10C
Weatherproof Proximity Mifare Reader
Exceptional Detection, High Reliability, Consistent Read-Range and Stability
Controller LED’s and Electronic Buzzer














































