Access Controllers, Readers & Accessories
Serial main and sub-controllers: All door hardware is connected to sub-controllers. Sub-controllers usually do not make access decisions, and instead forward all requests to the main controllers. Main controllers usually support from 16 to 32 sub-controllers. TCP/IP Modules/interfaces are used as communication interface to the PC to transfer the logs of entry and exist. Work load on the host PC is significantly reduced, because it only needs to communicate with a few main controllers. The overall cost of the system is lower, as sub-controllers are usually simple and inexpensive devices.
Non-intelligent, Semi Intelligent and Intelligent readers: Simply read the card number or PIN, and forward it to a control panel. In case of biometric identification, such readers output the ID number of a user. Typically, Wiegand protocol is used for transmitting data to the control panel, but other options such as RS-232, RS-485 and Clock/Data are not uncommon. This is the most popular type of access control readers. Examples of such readers are RFIF, Mifare, HID, UHF long range, etc.
F-2000 Series
1 Door, 2 Door & 4 Door Access control board.
20,000 Users capacity and 100,000 Logs capacity.
Support TCP/IP protocol. Auto-discovery tool allows setting and modification of network parameters directly and easily.
F-F1W
Standalone Fingerprint, WIFI, Card & Pin Access controller/ reader.
High sensitivity semi-conductor fingerprint sensor.
Multi-functional standalone access control with wiegand26 output.
F-F7DW
Fingerprint Standalone / WIFI Access Controller Reader.
Multi-functional standalone access control with Wiegand 26.
High sensitivity semi-conductor fingerprint sensor.
F-605W
Weatherproof/Vandal-proof Standalone Fingerprint Access Control (Narrow Design).
High sensitivity fingerprint sensor and supports admin card for add and delete functions.
Multi-functional standalone access control with Wiegand 26 output.
F-K12
RFID proximity reader and controller, easy to install, easy to use, stable performance.
Independent access control, can be directly implemented user passwords and cards.
Built-in high-current output drive for the electric lock and External doorbell option on the panel.
FT-15ND
RFID proximity reader and controller, easy to install, easy to use, stable performance.
Wiegand 26 out/in (be used as Wiegand reader to controller, connect extra reader).
Indication: LED and electronic buzzer.
FT-16ND
Proximity Access Control Reader/ Controller (Narrow Design).
Wiegand 26 out/in (be used as Wiegand reader to controller, connect extra reader).
Indication: LED and electronic buzzer.
FC-107
RFID proximity access controller, easy to install, easy to use, stable performance
Independent access control, can be directly implemented user passwords and cards.
External doorbell option on the panel.
FS-602
Weatherproof (IP68 Rating) Proximity Access Control Reader/ Controller .
Strong, sturdy and vandal proof Zinc Alloy electroplated case Supports user capacity up to 2000.
Indication: LED, electronic buzzer and backlit keypad .
F-T11
RFID proximity reader and controller, easy to install, easy to use, stable performance.
Wiegand 26 out/in (be used as Wiegand reader to controller, connect extra reader).
Touch keypad with backlight, with LED and electronic buzzer.
EL-2000R
Access Control Board for Two Readers
10,000 cards & 30,000 off-line transaction events
Global Anti-Passbook | Door Interlocking Capability
EL-GP20P-10
Weather resistant RFID Reader
Wide voltage range from 5 to 12.5 VDC
Externally programmable interface
EL-T1102MF
Weatherproof Touch Access Keypad Controller
13.5MHz IC Card Proximity Mifare | Stand-Alone Device
Verify via Password and or Card | Metal Case
EL-T1102EM
Weatherproof Touch Access Keypad Controller
125KHz RFID Card Proximity ID EM | Stand-Alone Device
Verify via Password and or Card | Metal Case
EL-ST100
Weatherproof Proximity Door Access Controller
Stand-Alone Device | Verify via Password/Card | Anti Card Collision
Four types of verification mode for greater security
EL-RD100
Weatherproof ProAce Proximity Reader
Exceptional Detection, High Reliability, Consistent Read-Range and Stability
Controller LED’s and Electronic Buzzer
EL-RD200
Weatherproof ProAce Proximity Reader with Integrated Keypad
50mm Maximum Effective Reading Range
Controller LED’s and Electronic Buzzer
EL-SR10D
Weatherproof Proximity ID Card Reader
Exceptional Detection, High Reliability, Consistent Read-Range and Stability
Controller LED’s and Electronic Buzzer
EL-SR10C
Weatherproof Proximity Mifare Reader
Exceptional Detection, High Reliability, Consistent Read-Range and Stability
Controller LED’s and Electronic Buzzer
EL-RSCVR-100
RS232/RS485/RS422 Converter C/W Power Adaptor.
DA-IP200
Serial-to-Ethernet device ( Built-in type )
Network Operation Mode: TCP Server, TCP Client, UDP
EL-EM100
Proximity Clamshell Card of 125kHz (EM/TK4100).
Material: Hard Shell – ABS, Cover Foil – PVC
Card Type: Proximity 125 kHz (EM/TK4100)
EL-EM200
Proximity ISO card of 125kHz (EM/TK4100)
Material: PVC
Card Type: Proximity 125 kHz (EM/TK4100)
EL-MF100
Mifare Card Capable to Work in Temperature Between -10ºC ~ 50ºC
Material: PVC
Card Type: Mifare MF1 IC S50 13.56 MHz
EL-EM-210
Proximity Key Fob (EM Type, Small, Eclipse)
Material: ABS
Working Temperature: -10 °C ~ 50 °C
EL-EM-202
Proximity Key Fob (EM Type, Small, Round)
Material: ABS
Working Temperature: -10 °C ~ 50 °C
EL-EM-203
Proximity Key Fob (EM Type, Medium, Round)
Material: ABS
Working Temperature: -10 °C ~ 50 °C
EL-EM-216
Proximity Key Fob (EM Type, Large, Round)
Material: ABS
Working Temperature: -10 °C ~ 50 °C
FX-NVR64DV
Proximity Key Fob (EM Type, Large, Round)
Material: ABS
Working Temperature: -10 °C ~ 50 °C
EL-2000PVC
PVC housing for Access Control Panel EL-2000
Maximum can fit 4 EL-2000 Access controller boards
Housing Size: 300 x 235 x 110 MM
Moxa NPort 5100
Network Interface Unit C/W Power Adaptor
TCP Server, TCP Client, UDP Server/Client, Pair Connection and Ethernet Modem
Low cost, credit card size
